B737 Fuel

Consisting on the following elements:

• 1 front panel with engraved texts
• 1 middle panel with holes for components nuts
• 1 back panel with holes for components fitting
• 1 engraved scale, spacer and needle for gauge
• 13 engraved annunciators (13 front pieces 5 mm thickness + 13 back pieces 3 mm thickness)

Needed components (optional):

• 1 8 positions rotary switch
• 6 ON-OFF toggle switches
• 10 high efficiancy blue leds
• 16 high efficiency amber leds
• 26 470 ohms resistors
• 2 M3x15 bolts
• 6 M3 nuts
• 4 M3x12 stamped head bolts (black)
• 8 M3x10 bolts
• 4 spacers 30 mm male-female
• 4 spacers 30 mm female-female
• 2 stops for 4 mm shaft

Knobs and servomotors not included.

Recommended (see "accesories" section below):

• 1 servomotor Hitec HS311 or similar.