No products
Product successfully added to your shopping cart
There are 0 items in your cart. There is 1 item in your cart.
View larger 
SimIO USB Main (v4.0 THT)
New
USB Main card with 16 inputs and 16 outputs. Compatible with IOCP and FSUIPC.
The main characteristics are:
- USB 2.0
- SMD components
- 16 digital inputs
- 16 digital outputs (0-24 volts DC)
- 5 A/D converters (12 bits)
- size: 135x85 cm (it can be stacked with the rest of cards).
- Firmware update by USB
- reset button
21 items available
More info
USB Main card with 16 inputs and 16 outputs. Compatible with IOCP and FSUIPC.
The main characteristics are:
- USB 2.0
- SMD components
- 16 digital inputs
- 16 digital outputs (0-24 volts DC)
- 5 A/D converters (12 bits)
- size: 135x85 cm (it can be stacked with the rest of cards).
- Firmware update by USB
- reset button
Card is shipped with the latest firmware, but only with the components needed to program this firmware on the microcontroller.
The rest of components are the following (available as an option):
- 1 Connector IDC10 Male
- 2 Connectors IDC40 Male
- 2 Integrated circuits CD74HCT573
- 2 Integrated circuits ULN2803A
- 1 Integrated circuit CD74HCT245N
- 2 Integrated circuits CD74HCT244N
- 1 Pin strip x3
- 4 Resistors arrays 10K (1/4w)
- 2 Sockets 9x2
- 5 Sockets 10x2
- 1 Jumper
- 1 Power connector
Bill of material and assembly instructions here.
Before connecting any input, output or power source, be sure that you have read and understood how they are connected and managed. A wrong connection and/or jumper selection can damage the electronic devices connected to SimIO boards, even your PC.
Access to our download area and check the latest versions of manuals, software and firmwares.
Instructions for safe use
To avoid malfunction or damage to your cards or computer please observe the following:
- before connecting your cards, check that jumper positions are set accordingly with the type of feeding and with your inputs configuration. If they are wrong, your computer can be damaged.
- do not expose them to water, moisture or place on a conductive surface whilst in operation
- do not expose them to heat from any source
- take care whilst handling to avoid mechanical or electrical damage to the principal circuit board and connectors
- avoid handling the printed circuit board while it is powered. Only handle by the edges to minimize the risk of electrostatic discharge damage
- cards should be operated in a well ventilated environment and should be not covered
- cards should be placed on a stable, flat non-conductive surface in use and should not be contacted by conductive items
Replacements/Returns
Being this card a card for development and not a closed/sealed equipment, Hispapanels can not check the correct use or the correct connections made with it. A wrong use or connection could result on shortcircuits and damages to components.
The customer have three days after delivery date to check that the card works properly. After this date, replacements and/or returns are not possible.
Reviews
No customer comments for the moment.