SimIO 32 inputs 32 outputs (v3.0 THT)

Before connecting any input, output or power source, be sure that you have read and understood how they are connected and managed. A wrong connection and/or jumper selection can damage the electronic devices connected to SimIO boards, even your PC.

Access to our download area and check the latest versions of manuals, software and firmwares.

Bill of material and assembly instructions here.

• before connecting your cards, check that jumper positions are set accordingly with the type of feeding and with your inputs configuration. If they are wrong, your computer can be damaged.
• do not expose them to water, moisture or place on a conductive surface whilst in operation
• do not expose them to heat from any source
• take care whilst handling to avoid mechanical or electrical damage to the principal circuit board and connectors
• avoid handling the printed circuit board while it is powered. Only handle by the edges to minimize the risk of electrostatic discharge damage
• cards should be operated in a well ventilated environment and should be not covered
• cards should be placed on a stable, flat non-conductive surface in use and should not be contacted by conductive items

Replacements/Returns

Being this card a card for development and not a closed/sealed equipment, Hispapanels can not check the correct use or the correct connections made with it. A wrong use or connection could result on shortcircuits and damages to components.

The customer have three days after delivery date to check that the card works properly. After this date, replacements and/or returns are not possible.