B737 PCB for MCP (v 4.1) (Collins)

Control for the following inputs:

• encoders: pilot CRS, copilot CRS, IAS, HDG, ALT, V/S
• rotary switch: BANK ANGLE (integrating the concentric circuit for HDG-BANK ANGLE)
• tactile switches: LVL, APP, HDG, VNAV, VOR, LNAV, ALT, V/S, ALT INT, CMD A, CMD B, CWS A, CWS B, N1, SPEED, C/O y SPD
• switches: pilot and copilot FD, DISENGAGE, A/T

and outputs:

• leds: pilot and copilot MA1, A/T, N1, SPEED, VNAV, LVL CH, HDG, LNAV, VOR LOC, APP, ALT H, V/S, CMD A, CMD B, CWS A, CWS B,

Needed components for Collins version of the MCP panel (optional):

• 6 groups of 7-digits 7-segment displays with PCB
• 6 EC11 encoders
• 1 12-positions rotary switch with chamfered shaft
• 1 (ON)-OFF-ON toggle switch
• 4 ON-OFF toggle switches
• 3 black push buttons
• 1 green led 5x2 mm
• 2 high bright green leds
• 1 40-pins IDC connector for PCB (male + female)
• 13 20-pins IDC connectors for PCB (male + female)
• 8 10-pins IDC connectors for PCB (male + female)
• 19 2-pin polarized connectors (male)
• 25 2-pin polarized connectors (female)
• 2 3-pin polarized connectors (female)
• 60 pins for polarized connectors
• 1 pin strip
• 3 470-ohms resistors
• 9 spacers 30 mm (female-female)
• 20 spacers 30 mm (male-female)
• 4 acrylic shafts (diameter 6 mm)
• 4 pieces to link encoders and 6 mm shafts
• 1 alluminium shaft (diameter 8 mm, length 80 mm)
• 1 acrylic shaft (diameter 4 mm, length 125 mm)
• 1 stop piece for 8 mm shaft
• 2 acrylic gears
• 12 acrylic washers
• 2 acrylic panels to build the concentric set
• 23 M3x10 bolts
• 3 M3x16 bolts
• 5 M3x12 button head bolts and nuts

Ribbon cables and leds strips not included.

Korry switches replicas are not included. Must be ordered separately with their components indicating the needed colors for the leds.

Assembly instructions here.

In order to build MCP panel like shown in the video below, you need to order:

• MCP panel Collins version
• MCP PCB with components
• 14 korry switches replicas with components
• ribbon cable 4 meter
• knobs for MCP
• 27 leds strips (3 leds each; total 81 leds)