B737 PCB audio (v 2.1)
€12.10
Tax included
Printed circuit board for B737 audio panel. High quality fiber-glass double faced PCB with solder mask that makes very easy installing the needed components.
Valid for both pilot and copilot sides.
Format: kit to be assembled by customer.
To be directly connected to SimIO boards.
Consisting on the following elements:
- 1 printed circuit board
Control for the following inputs:
- MIC SELECTOR buttons
- VHF1, VHF2, VHF3, HF1, HF2, FLT, SCV, PA, NAV1, NAV2, ADF1, ADF2, MKR and SPKR buttons
- RT/IC, MASK/BOOM, ALT/NORM toggle switches
- V/B/R rotary switch
and outputs:
- led for each tactile switch
Needed components (optional):
- 1 12-positions rotary switch
- 1 toggle switch (ON)-OFF-(ON)
- 2 toggle switches ON-OFF
- 22 illuminated (white) 6x6 mm tactile switches
- 22 470-ohms resistors
- 2 40-pin IDC connectors (male + female)
- 5 polarized connectors 2 pins (female)
- 3 polarized connectors 2 pins (male)
- 1 polarized connector 4 pins (male)
- 20 pins for polarized connectors
- 4 M3x25 bolts
- 4 grover washers
- 12 M3 nuts
- 1 pin strip
Leds strip are recommended for backlighting, (see accesories tab).
Assembly instructions here.
AP04P
100 Items
New
You might also like
Printed circuit board for B737 audio panel. High quality fiber-glass double faced PCB with solder mask that makes very easy installing the needed components.
Valid for both pilot and copilot sides.
Format: kit to be assembled by customer.
To be directly connected to SimIO boards.