B737 PCB radios (v 2)
€12.10
Tax included
Printed circuit board for B737 radios (COMM, COMM v.2, NAV and ADF). High quality fiber-glass double faced PCB with solder mask that makes very easy installing the needed components.
Includes connectors and elements to build concentric shafts.
Format: kit to be assembled by customer.
To be directly connected to SimIO boards.
Consisting on the following elements:
- 1 printed circuit board
Control for the following functions:
Radio COMM
- encoders
- TFR and TEST buttons
Radio COMM v.2
- encoders
- TFR and 6 function buttons
- function leds
Radio NAV:
- encoders
- TFR and TEST buttons
Radio ADF
- encoders
- TFR button
- ADF and TONE toggle switches
And all the 6-segments displays for Active and Standby frequencies.
Needed components (optional):
- 2 auxiliary panels for gears installation (supplied with radio panel)
- 2 gears
- 12 plastic washers
- 1 alluminium shaft (6 cm lenght, 8 mm diameter)
- 1 acrylic shaft (8 cm lenght, 4 mm diameter)
- 3 IDC connectors 10 pins (male and female)
- 2 IDC connectors 20 pins (male and female)
- 1 IDC connector 40 pins (male and female)
- 9 polarized connectors 2 pins (female)
- 8 polarized connectors 2 pins (male)
- 20 pins for polarized connectors
- 3 spacers 25 mm (female-female)
- 4 spacers 30 mm (female-female)
- 1 spacers 30 mm (male-female)
- 10 M3x10 bolts
- 10 M3x15 bolts
- 4 M3x12 button head bolts
- 8 grover washers
- 8 M3 nuts
- 1 pin strip
- 8 acrylic rods 3x3x80 mm
Leds strip are recommended for backlighting, (see accesories tab).
Assembly instructions here.
AP030506P
100 Items
New
You might also like
Printed circuit board for B737 radios (COMM, COMM v.2, NAV and ADF). High quality fiber-glass double faced PCB with solder mask that makes very easy installing the needed components.
Includes connectors and elements to build concentric shafts.
Format: kit to be assembled by customer.
To be directly connected to SimIO boards.