SimIO IDC extension (v 1.0)

New

Card with IDC connectors that avoid using flat cables with more than two connectors. The card is connected to any inputs or outputs connector on any card or to data bus.

The main characteristics are:

  • double height connectors
  • pins for external power source for data bus (5 volts DC)
  • size: 10x8 cm, like the rest of expansion boards (they can be stacked).

More details

This product is no longer in stock

9,90 €

  • No
  • Yes

More info

Card with IDC connectors that avoid using flat cables with more than two connectors. The card is connected to any inputs or outputs connector on any card or to data bus.

The main characteristics are:

  • pins for external power source for data bus (5 volts DC)
  • size: 10x8 cm, like the rest of expansion boards (they can be stacked).

This card is sold without components installed.

Needed components (optional):

  • 8 IDC connectors, 40 pins (male + female)
  • 1 pin strip
  • 2 terminal blocks (2 pins, bolt type)

Before connecting any input, output or power source, be sure that you have read and understood how they are connected and managed. A wrong connection and/or jumper selection can damage the electronic devices connected to SimIO boards, even your PC.

Access to our download area and check the latest versions of manuals, software and firmwares.


Instructions for safe use

To avoid malfunction or damage to your cards or computer please observe the following:

  • before connecting your cards, check that jumper positions are set accordingly with the type of feeding and with your inputs configuration. If they are wrong, your computer can be damaged.
  • do not expose them to water, moisture or place on a conductive surface whilst in operation
  • do not expose them to heat from any source
  • take care whilst handling to avoid mechanical or electrical damage to the principal circuit board and connectors
  • avoid handling the printed circuit board while it is powered. Only handle by the edges to minimize the risk of electrostatic discharge damage
  • cards should be operated in a well ventilated environment and should be not covered
  • cards should be placed on a stable, flat non-conductive surface in use and should not be contacted by conductive items

Reviews

No customer comments for the moment.

Write a review

SimIO IDC extension (v 1.0)

SimIO IDC extension (v 1.0)

Card with IDC connectors that avoid using flat cables with more than two connectors. The card is connected to any inputs or outputs connector on any card or to data bus.

The main characteristics are:

  • double height connectors
  • pins for external power source for data bus (5 volts DC)
  • size: 10x8 cm, like the rest of expansion boards (they can be stacked).

Write a review